Everything about Rotorcraft totally explained
A
rotorcraft is a heavier-than-air flying machine that uses
lift generated by
wings that revolve around a mast called rotor blades. Several rotor blades mounted to a single mast is referred to as a
rotor. Rotorcraft may also include the use of static lifting surfaces, but the primary distinguishing feature being lift provided by one or more rotors. Rotorcraft include
helicopters,
autogyros,
gyrodynes and
tiltrotors. In the
United States, the
Federal Aviation Administration places helicopters, autogyros (which it calls gyroplanes), and gyrodynes in the category Rotorcraft, and tiltrotors in the category
Powered lift.
Helicopters
A helicopter is a rotorcraft whose rotors are driven by the engine(s) throughout the flight, to allow the helicopter to take off vertically, hover, fly forwards, backwards and laterally, as well as to land vertically. Helicopters have several different configurations of one or more main rotors.
Helicopters with one driven main rotor require some sort of antitorque device such as a
tail rotor,
fantail, or
NOTAR, except some rare examples of helicopters using tip jet propulsion which generates almost no torque.
Autogyros
Unlike a helicopter, the rotor of an autogyro (sometimes called gyrocopter or gyroplane) is driven by aerodynamic forces alone, and thrust is provided by an engine-powered propeller similar to that of a
fixed-wing aircraft.
Gyrodynes
A Gyrodyne is a rotorcraft with a rotor system that's normally driven by its engine for takeoff, hovering and landing like a helicopter, but which also has an additional propulsion system that's independent of the rotor system. At higher speeds, the rotor system acts similar to that of an autogyro, no longer driving the aircraft but simply providing lift. A technology proposal by Carter Copter Technologies, as well as a research project funded by DARPA both refer to gyrodyne-type concepts as
heliplanes.
Tiltrotors
As the name implies, a
tiltrotor aircraft uses tiltable (rotating) propellers, or proprotors, for lift and propulsion. For vertical flight the proprotors are positioned horizontally to direct their thrust downwards, providing lift for vertical take off and landing, and hover. In this mode of operation the craft is essentially identical to a helicopter. As the craft gains speed, the proprotors are slowly tilted forward, eventually becoming perpendicular to the ground. In this mode the wing provides the lift, and the wing's greater efficiency helps the tiltrotor achieve its high speed.
Further Information
Get more info on 'Rotorcraft'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://rotorcraft.totallyexplained.com">Rotorcraft Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |
